Smart Solar Home PayGo System is a system that designed for users to pay for the prepayment or installment of this solar home system.
The System Model from 0.5KWH, 1KWH,2KWH And 3KWH.
AC&DC input and Output.
There are two forms of payment system, which can be full payment and pre-existing payment.
Prepayment payment system is Increased user’s purchasing power and enthusiasm for using the product.
1. DC input and DC output
2. AC 220V-285V Input and Output
3. Output :DC12V *5Port, AC220V-285V *2Ports,
4. 2 USB output port
5. Inbuilt Battery Deep cycle big capacity battery , and Hybrid smart solar inverter with MPPT Controller .
6. Solar Panel :High-efficiency solar panel
7. Display with system info
8. Paygo System : password control and Mobile Sim Card Control
PayGo System Manuel
1. Often press the key, the display lights up for boot
2. Repeatedly press the black button on the right side of the first row on the panel of the enclosure to display a series of digital codes.
3.open the file in the PC SOFTWARE page (Figure 1), click Recharge, Figure 2 page
4. Enter the numeric password shown on the display into the first line of Figure 2, and then select the number of days in the second line. After clicking OK, a string of digits will appear on the third line.
5. Enter the numeric code appearing in the third line of Figure 2 into the chassis display and press the Enter key (the rightmost key in the last line of the black key)
6. connect the LED can be used normally
7. often press the switch button on the chassis to shut down