1. Built-in high-precision automatic power point tracking
Powerful MPPT algorithm to optimize power harvesting from solar panels, accurately captures and locks in maximum output power points, and significantly increases power generation to more than 25%.
2. Reverse power transmission
Efficient power reverse transmission technology, one of the patented technologies, when the inverter is in the grid-connected output mode, the power is transmitted in the reverse direction, and the load in the circuit is automatically detected and prioritized.
With the use of electricity, it can only use the power to reverse the direction of the power supply to other places. The power transmission rate can reach 99.9%. In the photo voltaic power generation application system, the output efficiency is higher.
3. Full digital control
The charging module adopts intelligent soft switch technology and built-in MCU;
The inverter module adopts high-frequency switching power supply technology and 32-bit DSP full digital SPWM control technology. It has the characteristics of strong anti-interference ability, fast calculation speed, high degree of intelligence, etc.
Degrees and output waveform quality are high.
4. Grid-connected stacking mode
In grid-connected stacking mode, the inverters can be stacked in parallel in any number of parallel connections. In the off-grid stacking mode, the inverter can also be stacked in parallel in any number of off-grid applications.
The main monitoring system sends a master signal. The inverter receives the master signal and outputs it synchronously.
The output and input of the system are completely electrically isolated. The insulation performance of the entire distribution system is good. The fully isolated booster circuit is safer and more reliable to use.
High frequency; micro, high frequency processing, miniaturization, smaller size, lighter.
7. Protection function
Over-temperature protection, under-voltage alarm, under-voltage protection, over-voltage protection, short-circuit protection, overload protection.
8. Soft start output function.
9. Flexible installation
Multiple inverters can be stacked randomly to form a single-phase parallel stacking system. Three-phase systems can also be conveniently provided to provide three-phase AC power.
DC Input (PV)
Max.DC Input power (W)
Max.DC Voltage (W)
Nominal DC voltage(V)
Working voltage (V)
MPPT Voltage Range (V)
Max.Input Current (A)
Number of MPPT/
String Per MPPT
AC Output 1 (GRID)
Rated power (W)
>0.99(at rated power)
<3% (At Rated Power)
AC Output 2 (LOAD)
Rated power (W)
Topology of battery
Lithium battery or Lead-acid battery
Max. Charging current
Operating temperature rang
-25℃ to +40℃
Cooling method topology
Degree of protection
DC insulation monitoring,DC current protection,Grounding fault monitoring,
Overheating protection,Electronic Protection,Over voltage and short circuit protection etc.
RS485(standard)Wifi(optional),Ethernet (optional),CAN-BUS(Internal Communication),USB,Genet Port
Dimension (H*W*D mm)
Warranty (Years )